Publications

[Site in Progress…]

2022

V. Palazzi, L. Roselli, M.M. Tentzeris, M. M., P. Mezzanotte and F. Alimenti, “Energy-Efficient Harmonic Transponder Based on On-Off Keying Modulation for Both Identification and Sensing,” in Sensors, 2022, 22, 620.

G. Dong, X. Yang, Y. Fang and M. M. Tentzeris, “Filtering Push-Pull Power Amplifier Based on Multifunctional Impedance Matching Network,” in IEEE Microwave and Wireless Components Letters, 2022.

Y. Cui, E. M. Jung, A. Adeyeye, C. Lynch, X. He and M. Tentzeris, “Additively Manufactured RF Devices for 5G, IoT, RFID, WSN, and Smart City Applications,” in Nanotechnology for Electronics, Biosensors, Additive Manufacturing and Emerging Systems Applications, 2021, pp. 163-174

2021

A.D.Papadopoulos, B.K.Tehrani, R.A.Bahr, E.M.Tentzeris and E.N.Glytsis, “Uncertainty Quantification of Printed Microwave Interconnects by Use of the Sparse Polynomial Chaos Expansion Method”, in IEEE Microwave and Wireless Components Letters, vol. 32, no. 1, pp. 1-4, Jan. 2022.

C.Song, Y.Ding, J.G.D.Hester, X.He, R.Bahr, A.Georgiadis, G.Goussetis and M.M.Tentzeris, “Advances in Wirelessly Powered Backscatter Communications: Antenna/RF Circuitry Design to Printed Flexible Electronics”, Proceedings of the IEEE, Vol. 110, No. 1, pp. 171-192, Jan. 2022.

A.Eid, J.Zhu, L.Xu, J.G.D.Hester and M.M.Tentzeris, “Holography-Based Target Localization and Health Monitoring Technique Using UHF Tags Array”, IEEE Internet of Things Journal, Vol.8, No.19, pp.14719-14730, October 2021.

E.M.Jung, R.Vyas and M.M.Tentzeris, “A Wideband, Quasi-Isotropic, Ambient RF Energy Harvester Combining UHF-TV and FM”, IEEE Antennas and Wireless Propagation Letters, Vol.20, No.10, pp.1854-1858, October 2021.

R.Torres, R.Correia, N.B.Carvalho, S.Daskalakis, G.Goussetis, Y.Ding, A.Georgiadis, A.Eid, J.Hester and M.M.Tentzeris, “Backscatter Communications”, IEEE Journal of Microwaves, Vol.1, No.4, pp.864-878, October 2021.

T.Cheng, B.Li, Y.Zhang, Y.Li, C.Ramey, E.M.Jung, Y.Cui, S.G.Swaminathan, Y.Do, M.Tentzeris, G.D.Abowd and H.Oh, “Duco: Autonomous Large-Scale Direct-Circuit-Writing (DCW) on Vertical Everyday Surfaces Using A Scalable Hanging Plotter”, Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies, Vol.5, No.3, Article 92, September 2021.

A.D.Boursianis, M.S.Papadopoulou, S.Nikolaidis, P.Sarigiannidis, K.Psannis, A.Georgiadis, M.M.Tentzeris and S.Goudos, “Novel Design Framework for Dual-Band Frequency Selective Surfaces Using Multi-Variant Differential Evolution”, Mathematics, Vol.9, No.19, Article 2381, September 2021.

Y.Cui, R.Bahr, S.Van Rijs and M.M.Tentzeris, “A Novel 4-DOF wide-range tunable frequency selective surface using an origami “eggbox” structure”, International Journal of Microwave and Wireless Technologies, Vol.13, No.7, pp.727-733, September 2021.

F.A.Asadallah, A.Eid, G.Shehadeh, J.Costantine, Y.Tawk and M.M.Tentzeris, “Digital Reconfiguration of a Single Arm Three-Dimensional Bowtie Antenna”, IEEE Transactions on Antennas and Propagation, Vol.69, No.7, pp.4184-4188, July 2021.

J.Kimionis, A.Georgiadis, S.N.Daskalakis and M.M.Tentzeris, “A Printed Millimetre-Wave and Antenna Array for Backscatter Communications at Gigabit Data Rates,” Nature Electronics, Vol.4, pp.439-446, June 2021.

A.Adeyeye, C.Lynch, A.Eid, J.Hester and M.Tentzeris, “5.8GHz Low-Power Tunnel-Diode-Based Two-Way Repeater for Non-Line-of-Sight Interrogation of RFIDs and Wireless Sensor Networks”, IEEE Microwave and Wireless Components Letters, Vol.31, No.6, June 2021.

A.D.Boursianis, M.S.Papadopoulou, S.Koulouridis, P.Rocca, A.Georgiadis, M.M.Tentzeris and S.K.Goudos, “Triple-Band Single-Layer Rectenna for Outdoor RF Energy Harvesting Applications”, Sensors, Vol.21, No.10, Article 3460, May 2021.

H.Yang, X.Y.Liu, Y.Fan and M.M.Tentzeris, “Flexible Circularly Polarized Antenna with Axial Ratio Bandwidth Enhancement for Off-Body Communications”, IET Microwaves, Antennas and Propagation, Vol.15, No.2, pp.754-767, March 2021.

V.Palazzi, A.Cicioni, F.Alimenti, P.Mezzanotte, M.M.Tentzeris and L.Roselli, “Compact 3D-Printed 4×4 Butler Matrix Based on Low-Cost and Curing-Free Additive Manufacturing”, IEEE Microwave and Wireless Components Letters, Vol.31, No.2, February 2021.

A.Eid, J.G.D.Hester and M.M.Tentzeris, “5G as a Wireless Power Grid,” Nature Scientific Reports, No.11:636, January 2021. (Top 99%-110,000 Online Views)

2020